Make our fun DIY Car Wash & use our Aussie Mini Vehicles! 🚔

 

Try this super-fun DIY Car Wash.

Here’s what you’ll need:

Downloaded Sticker sheet 

Black board

White card

Brown cardboard  (55 x 37 cm)

4 foam hair curlers

14 x 12.5cm sponge cloth

White paint

Paint brush

14 x 12.5cm bubble wrap

Hot glue gun

Ruler

Scalpel

Pencil

Scissors

Double sided tape

 

Step 1 -

Cut 3 pieces of white card 46 x 3cm

Step 2

Score each piece 4 times at 3.5cm, 16cm, 30cm, 42.5cm

Step 3

Cut 0.5cm wide strips into the sponge cloth and the bubble wrap, leaving 1/4 uncut so it can be hot glued onto the white card

Step 4

Roughly brush white paint over one side of the bubble wrap

Step 5

Hot glue the sponge cloth, bubble wrap and foam curlers onto the scored white card

Step 6

Cut 4 pieces of black card to the following sizes:

1. 9 x 40cm
2. 9 x 33cm
3. 17 x 1 cm
4. 17 x 1cm

Step 7

Stick black board onto brown cardboard using double sided tape. The 9 x 40cm piece goes horizontally, while the 9 x 33cm black board goes vertically matching up perfectly. The two 17 x 1cm strips act as parking lines for the rest of the vehicles. 

Step 8

Cut out all the stickers on your downloaded sheet

Step 9

Stick on the white dash line stickers and car wash sign onto the road

Step 10

Hot glue the 3 white walls onto the brown cardboard (along the 40cm black piece) 5cm apart 

Step 11

Stick the remaining stickers onto the car wash — and you’re done! Enjoy!